1.1 --- a/cartridge.scad Wed Apr 23 20:42:16 2014 +0200
1.2 +++ b/cartridge.scad Wed Apr 23 20:57:55 2014 +0200
1.3 @@ -102,7 +102,9 @@
1.4
1.5 /* The groove around the sides and top. */
1.6
1.7 - groove_width = 2.5; /* how much the groove cuts out of the back */
1.8 + groove_width_exposed = 1.5;
1.9 + groove_width_extra = 1.0; /* how much the groove cuts out of the back */
1.10 + groove_width = groove_width_exposed + groove_width_extra;
1.11 groove_depth = 1.0; /* how deep the groove goes into each side */
1.12
1.13 /* Additional cutting to mate the back and front. */
1.14 @@ -116,14 +118,14 @@
1.15 */
1.16
1.17 inner_top_front_cutout_width = width - back_left - back_right;
1.18 - inner_top_front_cutout_depth = 1.0;
1.19 - inner_top_front_cutout_height = 1.0;
1.20 - inner_top_front_cutout_offset = top - inner_top_front_cutout_height;
1.21 + inner_top_front_cutout_depth = top_groove_width;
1.22 + inner_top_front_cutout_height = top - top_groove_depth;
1.23 + inner_top_front_cutout_offset = top_groove_depth;
1.24
1.25 inner_side_front_cutout_height = height - inner_top_front_cutout_offset;
1.26 - inner_side_front_cutout_width = 0.5;
1.27 - inner_side_front_cutout_depth = 1.0;
1.28 - inner_side_front_cutout_offset = front_side - inner_side_front_cutout_width;
1.29 + inner_side_front_cutout_width = front_side - groove_depth;
1.30 + inner_side_front_cutout_depth = groove_width_extra;
1.31 + inner_side_front_cutout_offset = groove_depth;
1.32
1.33 back_cavity_width = 68.0;
1.34 back_cavity_inner_width = 65.0;