1 Template: kolab-conf/title-ldap 2 Type: title 3 _Description: Configuring Kolab LDAP settings 4 5 Template: kolab-conf/ldap-server-selection 6 Type: string 7 _Description: Select an LDAP URI: 8 Please indicate the LDAP server to be used by the Kolab 9 components. (If this is a remote server, no attempt will 10 be made to set up server instances or to configure services, 11 but the indicated server instance will be populated with 12 Kolab settings.) 13 14 Template: kolab-conf/ldap-server-population 15 Type: boolean 16 _Description: Populate the LDAP server: 17 A different host is being used for LDAP services. Do you 18 want to populate the directory on this remote host? 19 20 Template: kolab-conf/ldap-instances-found-available 21 Type: note 22 _Description: Existing directory instances found: 23 It seems 389 Directory Server has an existing instance 24 configured and that this instance is available using the 25 stored credentials. 26 . 27 To change the Kolab configuration information, should you 28 wish to do so, run the following command: 29 . 30 setup-kolab -S ldap --reset-ldap-config 31 . 32 If the intention is to start with a fresh directory, please 33 make sure that /etc/dirsrv/ and /var/lib/dirsrv/ are clean 34 so that this configuration process can be performed in 35 full. 36 37 Template: kolab-conf/ldap-instances-found-unavailable 38 Type: note 39 _Description: Existing directory instances found: 40 It seems 389 Directory Server has an existing instance 41 configured but that this instance is not available using 42 the stored credentials. 43 . 44 To update the Kolab configuration with appropriate 45 information, run the following command: 46 . 47 setup-kolab -S ldap --reset-ldap-config 48 . 49 If the intention is to start with a fresh directory, please 50 make sure that /etc/dirsrv/ and /var/lib/dirsrv/ are clean 51 so that this configuration process can be performed in 52 full. 53 54 Template: kolab-conf/ldap-directory-not-changed 55 Type: note 56 _Description: Existing directory not changed: 57 No further LDAP configuration will be performed due to 58 the presence of existing directory information. Only the 59 Kolab configuration file has been updated. 60 61 Template: kolab-conf/ldap-setup-error 62 Type: note 63 _Description: Error during LDAP setup: 64 An error was detected in the setup procedure for the 65 directory server. This process will write the error and 66 output information to /var/log/kolab/setup.error.log and 67 /var/log/kolab/setup.out.log respectively. 68 69 Template: kolab-conf/ldap-admin 70 Type: password 71 _Description: Administrator password for the directory server: 72 Please supply a password for the LDAP administrator user 73 'admin', used to login to the graphical console of 389 74 Directory server. 75 76 Template: kolab-conf/ldap-manager 77 Type: password 78 _Description: Directory manager password for the directory server: 79 Please supply a password for the LDAP Directory Manager 80 user, which is the administrator user you will be using 81 to at least initially log in to the Web Admin, and that 82 Kolab uses to perform administrative tasks. 83 84 Template: kolab-conf/dirsrv-user 85 Type: string 86 _Description: User to run the directory server: 87 Please choose the system user the directory service should 88 use to run under. It should be an existing, unprivileged, 89 local system POSIX account with no shell. 90 91 Template: kolab-conf/dirsrv-group 92 Type: string 93 _Description: Group to run the directory server: 94 Please choose the system group the directory service should 95 use to run under. 96 97 Template: kolab-conf/kolab-domain-namespace 98 Type: string 99 _Description: Domain namespace to use for Kolab: 100 This setup procedure plans to set up Kolab Groupware for 101 the following domain name space. This domain name is 102 obtained from the reverse DNS entry on your network 103 interface. Please confirm this is the appropriate domain 104 name space. 105 106 Template: kolab-conf/kolab-root-dn 107 Type: string 108 _Description: Root dn to use for Kolab: 109 The standard root dn we composed for you as follows. 110 Please confirm this is the root dn you wish to use. 111 112 Template: kolab-conf/cyrus-admin 113 Type: password 114 _Description: Cyrus administrator password: 115 Please supply a Cyrus administrator password. This 116 password is used by Kolab to execute administrative 117 tasks in Cyrus IMAP. You may also need the password 118 yourself to troubleshoot Cyrus IMAP and/or perform 119 other administrative tasks against Cyrus IMAP directly. 120 121 Template: kolab-conf/ldap-kolab-service 122 Type: password 123 _Description: Kolab service password for the directory server: 124 Please supply a Kolab service account password. This 125 account is used by various services such as Postfix, 126 and Roundcube, as anonymous binds to the LDAP server 127 will not be allowed. 128 129 Template: kolab-conf/title-mysql 130 Type: title 131 _Description: Configuring MySQL for Kolab use 132 133 Template: kolab-conf/mysql-kolab 134 Type: password 135 _Description: Kolab database access password: 136 Please supply a password for the MySQL user 'kolab'. 137 This password will be used by Kolab services, such as 138 the Web Administration Panel. 139 140 Template: kolab-conf/mysql-root-new 141 Type: password 142 _Description: New MySQL root password: 143 Please supply a root password for MySQL. This password 144 will be the administrative user for this MySQL server, 145 and it should be kept a secret. After this setup process 146 has completed, Kolab is going to discard and forget 147 about this password, but you will need it for 148 administrative tasks in MySQL. 149 150 Template: kolab-conf/mysql-root-existing 151 Type: password 152 _Description: Current MySQL root password: 153 Please supply the root password for MySQL, so we can set 154 up user accounts for other components that use MySQL. 155 156 Template: kolab-conf/title-php 157 Type: title 158 _Description: Configuring PHP for Kolab use 159 160 Template: kolab-conf/php-timezone 161 Type: string 162 _Description: Timezone to be used by PHP: 163 Please supply the region-based timezone PHP should be using. 164 You have to use a continent or 'country/city' locality name 165 like 'Europe/Berlin'. Conventional time zones such as CEST 166 are not acceptable. 167 168 Template: kolab-conf/title-roundcube 169 Type: title 170 _Description: Configuring Roundcube to use Kolab 171 172 Template: kolab-conf/roundcube-password 173 Type: password 174 _Description: Roundcube database access password: 175 Please supply a password for the MySQL user 'roundcube'. 176 This password will be used by the Roundcube webmail 177 interface. 178 179 Template: kolab-conf/xmpp-bind-server 180 Type: string 181 _Description: Select an XMPP server bind URI: 182 Please indicate the location of the bind server providing 183 access to the XMPP server to be used by Converse. 184 . 185 If this is a remote server, a proxy will be set up to allow 186 users to connect to it.